ASKO Repair Service

What does ASKO dishwasher error code F2 indicate?

ASKO dishwasher error code F2 indicates the overfill or flood protection has been activated. Water in the base has triggered the safety float switch. Important: If there is water on the floor, do not touch the appliance until you can safely isolate the power. Turn off the water supply valve if accessible. Unplug from the mains only if you can do so without risk of contact with water. Do not use the appliance until it has been inspected by a qualified professional.

What does ASKO washing machine error code F1 mean?

ASKO washing machine error code F1 indicates a water level problem. The machine has detected too much water, which typically means the inlet valve is not closing properly. Turn off the appliance and unplug from the mains. Close the water supply valve if accessible. Do not attempt to use the appliance until it has been inspected by a qualified professional.

What does ASKO washing machine error code E22 mean?

ASKO washing machine error code E22 indicates a door lock fault. The door is closed but cannot be locked. Turn off the appliance and unplug from the mains before checking. Close the door again ensuring it clicks securely, then restart the washing programme. If the error persists, contact a qualified professional.

What does ASKO washing machine error code E3 mean?

ASKO washing machine error code E3 indicates a water fill fault. The machine is not filling with water correctly. Turn off the appliance and unplug from the mains before checking. Verify the water inlet valve is open, check that the filter on the water inlet hose is clean, and ensure the water supply hose is not deformed or kinked. If the problem persists, contact a qualified professional.

What does ASKO washing machine error code F3 mean?

ASKO washing machine error code F3 indicates a drainage problem. The machine cannot pump out water within the expected time. Turn off the appliance and unplug from the mains before checking. Clean the drain pump filter, ensure the drain hose is not kinked, and clear any blockages from the waste pipe. If the problem persists after these checks, contact a qualified professional.

Why is my ASKO tumble dryer making a bouncing sound?

If investigating unusual sounds, turn off the appliance and allow it to cool completely before inspection. If the tumble dryer has not been used over a longer period of time, a bouncing sound can occur due to a malformation of the support wheel, which will go away during the first cycle after this standstill. Another reason can be if you have loaded too much laundry.

What is Adaptive Temperature Control in ASKO refrigerators?

Adaptive Temperature Control automatically monitors usage patterns and adjusts the refrigerator temperature accordingly. During periods of frequent door opening, the system lowers temperatures to compensate, helping keep food fresh up to 20% longer compared to standard refrigeration.

What is Aqua Clean on ASKO ovens?

Aqua Clean is a steam-based cleaning function that saves time and effort. Pour water into the deep baking tray and place it on the lowest level. After 30 minutes, food residues on the oven enamel walls will have softened and can be easily wiped away with a damp cloth. Important: Only use Aqua Clean when the oven has cooled down completely, as it is more difficult to remove dirt and grease if the oven is hot.

Can I use the Delayed Start function on ASKO dishwashers?

Yes, ASKO dishwashers feature a Delayed Start function that allows you to programme the dishwasher to start up to 24 hours later. This is useful for running the dishwasher at a convenient time or taking advantage of off-peak electricity rates. Simply make your programme selections, set the delay time, press Start and close the door.

How often should I clean my ASKO washing machine?

Cleaning should be done regularly, with the frequency depending on how often you use the machine. Care and cleaning advice specific to your model can be found in the user manual.