AEG Repair Service in Dogsthorpe

What does error code E4 mean on an AEG hob?

Error codes E4 or E4xx on an AEG hob indicate the overheating protection has activated. Switch off the hob immediately. Do not touch the cooking surface - allow it to cool completely until the residual heat indicator is off before handling any cookware. Ensure your cookware is induction-compatible with a flat base. If the error persists after cooling, contact a qualified technician.

What does error code i30 mean on an AEG dishwasher?

Error code i30 on an AEG dishwasher indicates water has been detected in the base of the appliance. Do not stand in any pooled water near the appliance. If safe to do so, switch off at the mains and turn off the water supply - only unplug if you can do so without risk of water contact. Leave overnight to allow any foam to disperse. Check for visible leaks around the door seal. If the problem persists, contact a qualified technician.

What does error code E6 or E641 mean on an AEG hob?

Error codes E6 or E641 on an AEG hob indicate insufficient power - the hob is connected to only one phase. This often occurs with incorrect installation. Have a qualified electrician check the connection meets the requirements in the installation instructions.

What does error code C3 mean on an AEG oven?

Error code C3 on an AEG oven indicates the oven door was open when attempting to start pyrolytic cleaning. Ensure the oven door is fully closed before activating the pyrolytic function. The oven will not start the cleaning cycle until the door is properly secured.

What does error code E90, E91, E92, E93 or E94 mean on an AEG washing machine?

Error codes E90 to E94 on an AEG washing machine indicate a configuration or electronics communication error. Switch off at the mains for 30 seconds then switch back on. If the error persists, contact a qualified technician as the electronic control board may require professional diagnosis.

Where can I find the model and serial number on my AEG appliance?

The rating plate with model (PNC) and serial number is typically located: on washing machines and dryers, inside the door frame; on dishwashers, inside the door edge; on fridges and freezers, inside on the left wall; on ovens, behind the door on the frame; on hobs, on the underside. You will need these numbers when ordering spare parts or booking repairs.

How often should I descale my AEG steam oven?

Descale your steam oven when prompted by the display, typically every 15-30 uses depending on water hardness in your area. Use the AEG descaling product or citric acid solution. Run the automatic descaling programme and follow the on-screen instructions. In hard water areas, more frequent descaling may be required.

How do I use the AEG ProSteam function on my washer dryer?

The ProSteam function uses steam to reduce creases and refresh garments. Select ProSteam as a standalone cycle for lightly worn clothes that need freshening, or add it to a wash programme to reduce ironing time. ProSteam is gentle on fabrics and helps reduce allergens.

How can I save energy when using my AEG washing machine?

Use the Eco 40-60 programme for normally soiled cotton laundry, wash at lower temperatures such as 30°C, and wait until you have a full load before running the machine. Consider using the delay start feature to run cycles during off-peak electricity hours.

What is the warranty period for AEG appliances in the UK?

AEG appliances sold in the UK come with a standard 2-year manufacturer warranty. Selected models are eligible for an extended 5-year warranty when registered within 90 days of purchase. Register your appliance on the AEG website to activate your warranty and receive product updates and support information.