ASKO Repair Service in Orton Longueville

What does ASKO dishwasher error code F40 mean?

ASKO dishwasher error code F40 indicates an inlet valve leak. The inlet valve has been allowing water through when it should be closed. Turn off the appliance immediately and close the water supply valve. Unplug from the mains. Do not attempt to use the appliance. Contact a qualified professional for repair.

What should I do if my ASKO tumble dryer shows error F4?

ASKO tumble dryer error code F4 is a lint filter alert indicating excessive lint accumulation. Turn off the appliance, unplug from the mains, and allow it to cool completely before any inspection. Remove and thoroughly clean the lint filter, ensure it is correctly reinstalled, and clean the filter housing. Regular lint filter cleaning after each cycle prevents this error and improves drying efficiency. If the error persists after cleaning, contact a qualified professional.

What does ASKO washing machine error code E3 mean?

ASKO washing machine error code E3 indicates a water fill fault. The machine is not filling with water correctly. Turn off the appliance and unplug from the mains before checking. Verify the water inlet valve is open, check that the filter on the water inlet hose is clean, and ensure the water supply hose is not deformed or kinked. If the problem persists, contact a qualified professional.

What does ASKO washing machine error code E22 mean?

ASKO washing machine error code E22 indicates a door lock fault. The door is closed but cannot be locked. Turn off the appliance and unplug from the mains before checking. Close the door again ensuring it clicks securely, then restart the washing programme. If the error persists, contact a qualified professional.

How do I fix ASKO dishwasher error code F7?

ASKO dishwasher error code F7 indicates a drainage fault. Turn off the appliance and unplug from the mains before checking. Clean the drain filter at the bottom of the dishwasher, check the drain hose for blockages, and ensure the sink waste is clear. If the problem persists after these checks, do not continue using the appliance. Contact a qualified professional for inspection.

How does the Auto Humidity Control work in ASKO refrigerators?

The Auto Humidity Control maintains optimal humidity levels in the vegetable drawers. A special membrane automatically opens when humidity exceeds 90% and closes below that level to retain moisture inside the drawer. This fully automated process prevents fruits and vegetables from drying out or decaying prematurely.

What is the Boost function on ASKO range hoods?

The Boost function runs the fan at maximum speed for two minutes to quickly eliminate temporary excessive fumes, such as when searing meat or cooking at high heat. After two minutes, the hood automatically returns to the previous setting.

How does an ASKO Wine Climate Cabinet maintain proper humidity?

ASKO Wine Climate Cabinets maintain humidity at around 70%, which is optimal for wine storage. The humidity should stay between 50% and 80% to prevent corks from drying out or mould forming. A HumidityBox accessory can be used in specific zones to prevent humidity dropping too low. If humidity falls to 40% or below, an alarm will activate.

What cleaning products should I avoid using in my ASKO dishwasher?

Never use anti-freeze, Draino, CLR, or other chemical drain cleaners in your ASKO dishwasher. Also, do not spray cleaning products directly on the door.

What is ASKO's Soft Drum technology in tumble dryers?

Soft Drum technology features circular indentations with bevelled edges that enhance air flow around the load, increasing drying efficiency. The design has a cushioning effect that reduces wear and tear on fabrics, prevents garments from tangling during drying, and results in smoother, wrinkle-free clothes. It works effectively with both small and large loads.