Teka Appliance Repair Service
Specialist repairs using genuine Teka spare parts
Laundry
Certified repair for Teka washing machine and tumble dryer. Drum, motor and control board faults resolved at home with genuine spare parts.
Washing machine not draining?
Most Teka laundry faults are repaired in a single visit. Get a free, no-obligation quote today.
Cooling
Same-day response for urgent Teka combi fridge, freezer and fridge side by side breakdowns. Compressor, thermostat and sealed system repairs across Cambridgeshire.
Fridge not cooling? Every minute counts.
Emergency Teka cooling repairs available today. Call now to save your food.
Cooling
Professional Teka fridge side by side repair service in Peterborough. Certified technicians with genuine spare parts and a written warranty.
Fridge not cooling? Every minute counts.
Emergency Teka cooling repairs available today. Call now to save your food.
Cooking
Expert diagnostics for all Teka oven, gas hob, induction hob, vitroceramic hob and microwave. Heating elements, thermostats, igniters and control boards repaired on site.
Oven not heating evenly?
Certified Teka kitchen engineers across Peterborough. Book a repair and get cooking again.
Cooking
Professional Teka induction hob and vitroceramic hob repair service in Peterborough. Certified technicians with genuine spare parts and a written warranty.
Oven not heating evenly?
Certified Teka kitchen engineers across Peterborough. Book a repair and get cooking again.
Cooking
Professional Teka microwave repair service in Peterborough. Certified technicians with genuine spare parts and a written warranty.
Oven not heating evenly?
Certified Teka kitchen engineers across Peterborough. Book a repair and get cooking again.
Cleaning & Extraction
Teka dishwasher and cooker hood repairs. Pump, spray arm, drainage and motor faults fixed at your home with genuine parts.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Teka parts and a written warranty included.
Climate Control
F-Gas certified engineers for Teka air conditioner. Installation, fault diagnosis and refrigerant handling across Cambridgeshire.
Air conditioning not cooling?
Teka climate control repairs by certified engineers. Same-day response available across Cambridgeshire.
Premium Appliances
Specialist repairs for Teka coffee machine. Precision components and brand-specific diagnostics for high-end appliances.
Premium appliance? Premium service.
Specialist Teka premium appliance repairs. Treated with the care your appliance deserves.
Why Teka Appliances Need Specialist Repair
Teka appliances incorporate advanced proprietary systems that require certified engineers with brand-specific training to diagnose and repair correctly.
Teka appliances use integrated electronic diagnostics. Our engineers connect directly to Teka control boards using brand-specific tools to read fault codes and pinpoint issues accurately.
Every repair uses genuine Teka spare parts sourced directly from authorised distributors. Original components ensure compatibility, performance and longevity — backed by a manufacturer warranty.
Teka appliances must meet strict UK safety regulations. Our certified engineers follow Teka service procedures and test every repair to BS EN standards before sign-off.
Many Teka appliances feature Wi-Fi connectivity and smart home integration. Our engineers can diagnose firmware issues, reset connectivity modules and restore remote control functionality.
Common Teka Error Codes
What does the Err3 error mean on a Teka washing machine?
The Err3 error on Teka washing machines indicates that the temperature sensor is not properly connected or is damaged. Contact a specialist technician as this is an internal component fault that requires professional diagnosis and repair.
What does the E4 error mean on a Teka dishwasher?
The E4 error on Teka dishwashers indicates an overflow detection, meaning potential water leakage has been detected inside the appliance. Turn off the main water supply immediately. Check for visible leaks around the dishwasher. Do not attempt to restart until the source of the leak is identified. Contact a specialist technician for inspection and repair.
What does the E6 error mean on a Teka dishwasher?
The E6 error on Teka dishwashers indicates a water drainage malfunction where the appliance does not pump out the water correctly. Clean the filter at the bottom of the dishwasher. Check that the drain hose is not kinked or blocked. Verify the siphon connection is clear. If the issue persists, the drain pump may need replacing by a technician.
What does the E3 error mean on a Teka dishwasher?
The E3 error on Teka dishwashers indicates a heating phase error where the appliance is not reaching the required temperature within the preset time. Restart the washing programme to see if the error clears. If it persists, contact a specialist technician as the heating element or sensor may need replacing.
What does the C90 error mean on a Teka induction hob?
The C90 error on Teka induction hobs indicates that the on/off sensor is obstructed, preventing the hob from switching on. Remove any objects from the touch control area. Clean the control surface thoroughly and dry it completely. The error should clear automatically once the sensor is no longer obstructed.
Frequently Asked Questions
Why won't my Teka gas hob burner stay lit?
If the burner ignites but won't stay lit, the thermocouple may be dirty or misaligned. Clean the area around the ignitor and flame failure device with a small brush and ensure they are dry. Check that the burner caps are correctly positioned. If the problem persists after cleaning, the thermocouple may need to be inspected by a specialist technician.
How do I use combination cooking (microwave and grill) on my Teka microwave?
Press the COMBI button to select the combination mode. C-1 uses 55% microwave and 45% grill power, suitable for fish and similar foods. C-2 uses 36% microwave and 64% grill power. Set the cooking time using the dial and press start.
Why is there water remaining inside my Teka dishwasher at the end of the programme?
If water remains after the wash cycle completes, it usually indicates a drainage issue. Check that the drain pipe is not clogged or kinked, and ensure the dishwasher filters are clean.
How should I maintain my Teka refrigerator?
Clean surfaces that contact food regularly, along with accessible drainage systems. The rubber door seals should be cleaned regularly to prevent bacteria and mould growth, as they are warmer than the interior.
How do I clean the metal filters on my Teka cooker hood?
Release the anchoring points to withdraw the filters. Clean them by soaking in hot water with neutral detergent until the fat dissolves, then rinse under the tap. Alternatively, they can be washed in a dishwasher.
Areas We Cover in Cambridgeshire
Teka appliance repair service across the ten largest towns in the county
Other Midea Group Brands
Appliances from other brands in the same corporate group are also repaired
Book a Teka Repair
Specialist Teka engineers. No-obligation quote.