Teka Repair Service in Orton Longueville

What does the E4 error mean on a Teka dishwasher?

The E4 error on Teka dishwashers indicates an overflow detection, meaning potential water leakage has been detected inside the appliance. Turn off the main water supply immediately. Check for visible leaks around the dishwasher. Do not attempt to restart until the source of the leak is identified. Contact a specialist technician for inspection and repair.

What does the U400 error mean on a Teka induction hob?

The U400 error on Teka induction hobs indicates an incorrect electrical connection where the hob has been connected to an inappropriate power supply. Do not use the hob. Contact a qualified electrician to verify the electrical installation meets the manufacturer's requirements. This error cannot be cleared until the connection is corrected.

What does the Err8 error mean on a Teka washing machine?

The Err8 error on Teka washing machines indicates that water has exceeded the protective level, triggering the overflow protection system. Contact a specialist technician as this error indicates a fault with the water level sensing system or inlet valve that requires professional repair.

What does the Err4 error mean on a Teka washing machine?

The Err4 error on Teka washing machines indicates a heater error where the heating element has failed. This error typically appears at the end of a cycle. Contact a specialist technician as the heating element will likely need testing and replacement.

What does the F symbol mean on a Teka induction hob?

The F symbol on Teka induction hobs indicates that a cooking zone is activated but no suitable pot or pan has been detected. Place an induction-compatible pot or pan centrally on the cooking zone. The cookware must have a magnetic base and be the correct size for the zone. If the symbol persists with suitable cookware in place, contact a specialist technician as there may be a fault with the pan detection system.

How do I use combination cooking (microwave and grill) on my Teka microwave?

Press the COMBI button to select the combination mode. C-1 uses 55% microwave and 45% grill power, suitable for fish and similar foods. C-2 uses 36% microwave and 64% grill power. Set the cooking time using the dial and press start.

What temperature should I set my Teka fridge and freezer to?

The fridge compartment should be set between 0°C and 8°C, with 3-4°C being optimal from a health perspective as this limits bacterial and mould growth. The freezer should be set to -18°C or -20°C for normal operation.

How should I maintain my Teka washing machine?

Wipe out the inside of the door seal regularly to remove mould and detergent deposits. Leave the door slightly open between washes to prevent bad smells developing. Clean the inlet filter periodically using a soft brush with soapy water.

How should I clean my Teka induction hob?

After each use, wipe the glass surface with a damp cloth and mild detergent to remove spills. Keep the control panel clean and dry at all times. Allow the hob to cool before cleaning.

What does SHOW, SHO or DEMO mean on my Teka oven display?

When SHOW, SHO or DEMO appears on your oven display, it means the demonstration mode is activated. In this mode, the oven functions normally but does not heat up. To disable demo mode, disconnect the oven from the power supply for at least 10 seconds, then reconnect it. On some models, you may need to press and hold the + and - buttons for 10 seconds after reconnecting.